New Asphalt Driveway Care Tips

Construction & Contractors Articles

If you want a long lasting and durable driveway, then asphalt is one of the best materials that can be secured outside your home. Asphalt can last 30 years or more as long as a professional completes the installation. You need to care for your driveway properly though for the first 12 months after installation while the curing process takes place. You may know that you should not park in the same spot every day, but there are many other things that you should be aware of as well.  

Do Not Disturb the Driveway Edge

Asphalt is a liquid material that is extremely dense and viscous, but the fluid material is not strong on its own. To provide strength, contractors secure a layer of gravel across the surface of your driveway so the asphalt has something to adhere to. The adhesion and curing process creates a strong structure. However, asphalt is smoothed over the edges of the driveway to finish the construction and it has no gravel to stick to. The grass, sod, or dirt that sits close to the edge can hold the asphalt in place as it solidifies. This means you should not disturb the greenery that sits on the edge of the construction.

Taking Care of Your Lawn

Do not dig up the dirt close to your driveway edge and be careful when mowing your grass. Also, pay attention to weeds that grow close to the driveway. The roots of these weeds can grow underneath the asphalt, but you should not pull them out or you will loosen the soil in the region that holds the asphalt in place. Use weed killers instead to get rid of the destructive plants. Selective herbicides are best, because they will kill dandelions and other weeds without damaging the grass.

If you do not want to use chemicals to kill weeds near the edge of your driveway, then consider sprinkling a small amount of salt on the weeds that have started to grow. The salt works to dehydrate the weeds, but you need to be careful where you add the salt because it will kill grass as well.

Do Not Treat Puddle Areas

Once your driveway is fully installed, you may notice some small areas along the surface where water seems to collect. The areas may look like puddles of indentations within the driveway, but they may not be problematic down the road.  

During installation, your contractor will compress the gravel across your driveway to make sure that your driveway does not sink. Over time, the gravel underneath the asphalt settles. This often happens as water drains and moves through the gravel material. When this occurs, your driveway will likely flatten out as the gravel shifts slightly to lower areas. This means that you do not need to treat or seal puddle areas unless they contain cracks or they remain after the initial curing period.  

Sealing too soon is also not wise, because it can damage your driveway. The oils in the asphalt must evaporate over time to create a hard surface. Sealers trap the oils and keep the material pliable for an extended period of time.

Inspecting and Avoiding Indentations

If you are concerned about the puddles in your driveway, then make sure that water evaporates from the area instead of sinking underneath the asphalt material. If water seems to disappear gradually over the course of several hours, then the water is likely not draining into the asphalt. You can visually inspect the indentation for cracks and openings once the water dissipates as well.

Once you have concluded that the indentation does not contain cracks, try not to park or drive over the area until your driveway cures. This will help to make sure the puddle area does not deepen before the gravel has time to settle properly.

Hiring a contractor to install a new driveway is a good choice if you want asphalt secured on your property. You need to care for the asphalt while it cures though, and the tips above can help you with this. If you need information, you can click here to investigate.


12 January 2015

Exploring Contractor's Hand Tools

Welcome to my site, my name is Hugo Ciela. I'd like to talk to you about hand tools used by contractors of all kinds. Although air and power tools frequently make jobs easier, and sometimes even more enjoyable, hand tools have not lost their place in this industry. Many jobs cannot be completed without a hand tool or two due to their versatility and precision. Contractors of all types, ranging from roofers to foundation specialists, keep a plethora of hand tools in their worksite kit. I will discuss the types of hand tools you might see in those kits. I will also explore all of the different ways they can be used. Please stick around to learn more information about contractor's hand tools.