Warm Toes Without Leaks: 5 Reasons To Choose Electric Underfloor Heating Over Hydronic Systems For An Existing Home


Since heat rises, putting a heat source under your floors gives you a warmer room and eliminates the pain of putting bare feet on icy tiles or hardwood. There are two main systems for delivering underfloor heat, and they offer different benefits to the homeowner trying to save money while staying comfortable. Learn how electric heating lines make more sense for finished homes that need renovations to accommodate the heating system.

No Chance of Leaks

One tiny pinhole leak in a water line lets enough water escape to cause serious damage to the structure of your home. With the water lines hidden under your floor, it's also hard to notice when a leak starts up until the damage spreads. Electric lines can't leak. If they do malfunction, they won't do any serious damage to the flooring above them or the foundation below.

This is especially important when your home is built on a solid concrete slab foundation. Homes with pier foundations that leave the underside of the floor exposed are easy enough to inspect regularly, but it takes a visit from a professional to check the pressure on completely embedded pipes.

Lower Upfront Costs

If you're trying to upgrade your home's heating while on a tight budget, electric underfloor systems likely fit your needs better than water-based equipment. The heating lines come with a lower price tag, and the simpler installation process also reduces labor costs. You'll also save money by:

  • Avoiding the purchase of a boiler to heat up the water
  • Reducing maintenance costs throughout the lifespan of the heating equipment
  • Using a costly central furnace less, especially when the temperatures aren't that low and underfloor heating is sufficient

Reduced Space Requirements

Each coil of electric line used for warming up the floor has a much thinner diameter than the PEX pipes used for transporting heated water. This means you can lay the wire over the top of a concrete slab or wood subfloor, cover it with a thin coat of mortar, and put the top layer of flooring down. There's also no need for laying down a layer of foam insulation board on the concrete or wood first, which is necessary to prevent heat loss with hydronic systems.

Faster Installation

If you're having guests in a few weeks and you'd like them to experience warm floors in the bathroom or kitchen, the quick installation process for electric underfloor heating makes it a good fit for your situation. With fewer changes needed to the existing floor and no boiler and zone valves to install, the heating contractors can get in and out with a minimal impact on your family's routine. A single room can be completed in two or three days if the workers don't discover any unusual complications after pulling up the existing flooring.

Reduces Weight for Upper Floors

Want to warm up more than just your first floor with a hidden radiant heat system? Either add extra metal support brackets to keep the water pipes from slumping down and damaging the ceiling of the room below or stick with lightweight electric lines. Since it's easy enough to access the bottom of an upper floor without pulling up any flooring, it's well worth the effort to run extra lines and enjoy steady heat throughout the house.

This kind of affordable and effective heating is well-worth the investment, especially in rooms with hard and cold floors like bathrooms and kitchens. It's widely used and very popular in Europe and the United Kingdom, but you can still find plenty of knowledgeable heating contractors at sites like http://www.alliedairheat.com in the United States that know how to handle the installation.


3 March 2015

Exploring Contractor's Hand Tools

Welcome to my site, my name is Hugo Ciela. I'd like to talk to you about hand tools used by contractors of all kinds. Although air and power tools frequently make jobs easier, and sometimes even more enjoyable, hand tools have not lost their place in this industry. Many jobs cannot be completed without a hand tool or two due to their versatility and precision. Contractors of all types, ranging from roofers to foundation specialists, keep a plethora of hand tools in their worksite kit. I will discuss the types of hand tools you might see in those kits. I will also explore all of the different ways they can be used. Please stick around to learn more information about contractor's hand tools.